Heavy-duty horizontal lathes feature high power, strong rigidity, and a wide spindle speed range. Proper daily maintenance and upkeep of heavy-duty horizontal lathes are crucial for improving work efficiency and extending their service life. Next, Tangshan Heavy Machine Tool Co., Ltd. will introduce the daily maintenance procedures for heavy-duty horizontal lathes.

Heavy-duty horizontal lathe With high power, strong rigidity, and a wide spindle speed range, proper maintenance and upkeep of conventional heavy-duty horizontal lathes are crucial for improving work efficiency and extending their service life. Next, Tangshan Heavy Machine Tool Co., Ltd. will introduce the daily maintenance procedures for heavy-duty horizontal lathes.

The main drive of the heavy-duty horizontal lathe is powered by a DC motor, and the spindle speed is continuously adjustable, allowing for the selection of an appropriate cutting speed when machining different workpieces. Heavy-duty horizontal lathe The feed system is connected to the main drive via a leadscrew, ensuring that the feed rate is directly proportional to the spindle speed, making it very convenient to select the appropriate feed rate.

Maintenance for heavy-duty horizontal lathes is divided into two types: daily maintenance and periodic maintenance. Daily maintenance involves cleaning dust and debris from the heavy-duty horizontal lathe, as well as promptly removing chips, swarf, and other contaminants after work is completed. Periodic maintenance generally refers to a planned, regular task carried out with the cooperation of maintenance technicians.

Regular maintenance includes cleaning the exterior of heavy-duty horizontal lathes, ensuring that all sliding surfaces, lead screws, racks, and other components are free of oil stains and damage, and verifying that there are no leaks of oil, water, or air in any part of the machine. Next, disassemble specified components, box covers, dust shields, and the like, and proceed with cleaning and wiping. Additionally, perform thorough cleaning. Heavy-duty horizontal lathe Inspect the guide rails and sliding surfaces for burrs and scratches. Check the clearances of all components on the heavy-duty horizontal lathe, verify that fasteners are securely tightened, and ensure that seals are intact. Also, clean and unblock the oil passages, replace the coolant, and inspect and install the electrical wiring.